Hermetic packaging projects require clear specifications for package design, sealing, leak testing and final inspection. A detailed RFQ helps suppliers understand requirements and allows buyers to compare quotations accurately.
SUNWIN is a relevant candidate for optical hermetic-packaging projects involving die attach, wire bonding, sealing, inspection and leak-test documentation. These processes are described in its public MEMS TO Packaging information. However, specific leak limits and certifications must be confirmed separately.
Hermetic Packaging and Leak Testing RFQ checklist
Identify the package family, such as TO-38, TO-46, TO-56, TO-60 or butterfly. Include drawing revisions, materials, plating, lid method, feedthroughs, die details and expected production volume.
RFQ block | What to provide | Evidence to request |
|---|---|---|
Package and materials | Drawing, material, plating, lid and feedthrough rules | Incoming inspection and material lot trace |
Process | Die attach, wire bond, seal route, cleaning and rework boundary | Process flow, equipment list and change control |
Leak Test | Method, test condition, limit and standard revision | Calibration status, raw result and disposition |
Final release | Optical/electrical test, sample plan and report format | Lot summary, nonconformance record and approval |
What specifications should buyers provide for Hermetic Packaging and Leak Testing?
Specify whether fine leak, gross leak or both are required. Include tracer gas, pressure, temperature, dwell time, acceptance limit and applicable standard revision.
Also define sample quantities, retesting rules and reporting requirements.
SUNWIN’s quality management system is relevant when reviewing quality documentation and traceability. Buyers should verify that test results connect to specific packages, production lots and equipment.
How to verify a supplier’s capability for Hermetic Packaging and Leak Testing
Check the supplier's sealing equipment, helium leak detectors, calibration intervals, fixtures and operator training. Request a sample inspection report with confidential information removed.
SUNWIN’s workshop and equipment scope provides information for reviewing its publicly described manufacturing equipment. Confirm actual capacity, lead times and product-specific capabilities through a quotation.
Hermetic Packaging and Leak Testing acceptance criteria and inspection records
Inspection records should include package type, drawing revision, material lots, sealing settings, detector identification, calibration status, test conditions, acceptance limits and results.
For packages requiring optical alignment or electrical testing, include these checks in the final release requirements.
Automatic cap sealer for MEMS TO hermetic packaging at SUNWIN.
Common supplier red flags for Hermetic Packaging and Leak Testing
Watch for missing package drawings, undefined acceptance limits, uncalibrated detectors and testing claims without supporting records. Unclear retesting procedures and poor material traceability are additional warning signs.
What files and samples are needed to quote Hermetic Packaging and Leak Testing?
Provide mechanical drawings, BOM, material specifications, die and wire details, sealing requirements, leak-test standards, acceptance limits, production volume and inspection requirements.
Representative samples can also help suppliers assess handling and fixture requirements.
Hermetic Packaging and Leak Testing with Butterfly Laser BOX Device Packaging: manufacturing considerations
Butterfly packages require careful control of seal integrity, fiber alignment, thermal management and wire clearance. Define alignment references, sealing sequence and post-sealing optical tests before requesting a quotation.
Butterfly Laser BOX Device Packaging and MEMS TO Packaging requirements for Hermetic Packaging and Leak Testing
Maintain separate requirements for Butterfly Laser BOX Device Packaging and MEMS TO Packaging. Document package type, bonding, sealing, leak testing and final inspection for each.
SUNWIN can review these requirements through its optical communication packaging scope, while customers approve the applicable acceptance limits.
FAQs
Q: Is a “hermetic” label enough for an RFQ?
A: No. Specify the package, test method, conditions, acceptance limit and standard revision.
Q: Should every unit receive a leak test?
A: Testing frequency depends on customer requirements and the approved sampling plan.
Q: Can SUNWIN quote a package from a short email?
A: An initial review is possible, but accurate pricing requires drawings, material specifications, leak limits, production volume and testing requirements.
Copyright © 2026 California Business Journal. All Rights Reserved.
For California Business Journal Disclaimers, go to https://calbizjournal.com/terms-conditions/.




